Your water heater puts in a lot of effort to keep your faucets and appliances in working order. However, occasionally it exerts itself a little too much, leading to problems that may require professional assistance. Although there are many different types of water heaters, they all often have similar problems. Being familiar with the most frequent problems will enable you to fix them quickly and easily, with the help of your toolkit.
Water Heater Problems
If you suspect a leak near the top of your electric water heater tank, one of a few possibilities may be the cause.
- The T&P valve could have failed
- The cold recess or hot outlet pipes could be loose
- The recess valve could be leaky
- Everything is easily repaired or fixed.
An electrical water heater tank that leaks at the bottom is frequently caused by
- An unreliable electrical element seal
- A small amount of water escapes via the overflow line when the T&P valve is left open to release excess pressure inside the tank.
Sometimes the only solution is to replace the tank. For this, you will require professional assistance. Check with Plumber Today which is a plumbing company in North Carolina. They are a full-service Charlotte plumbing firm that can handle any problems you encounter, whether they are residential or commercial. They prioritize outstanding work quality, open communication about costs, and a strong work ethic. If you need 24-hour emergency plumbing help in Charlotte, call them.
Dirty or Smelly Water
Dirty or smelly water indicates contamination in the storage tank. Smells coming from hot water is because of bacteria in the tank. Another solution is to flush the tank, which should ideally be done once or twice a year to maintain a healthy heater. If odor comes from both hot and cold water, then there may be some issue with the outside source and not with the heater. In any scenario, it’s preferable to hire a skilled craftsman if the odor persists.
If the water is discolored, the chance is of mineralization and sediment accumulation inside the tank. The effectiveness of the tank will be reduced by any accumulation. Rust-colored water may be a sign that the anode rod needs to be replaced because its primary purpose is to reduce sediment in the tank.
No Hot Water
If the water takes longer than usual to warm up or you get no hot water at all then you can blame the pilot light. If the pilot light has blown out, the issue may be with the thermocouple connection or the pilot light control valve. If there isn’t enough hot water, the issue may also be with the heating element or dip tube, causing cold water to leak out instead of mixing with hot water.
Noise or Rumbling Sound
Rumbling noises are a sign of a serious storage tank problem. Burning sediments or broken heating components could produce unusual noises. You need to turn off your heater right away if you think you hear it rumbling. This symptom can indicate that pressure is developing inside your tank and could eventually lead to an explosion. Consult an expert and contact a professional to do the repairing.
Water heaters also need maintenance every ear as they work the whole winter to provide comfort to homeowners. Ignoring minor repairs this season may result in major damages and hefty expenses by next season. Inspect your water heater every year with a professional and get all minor/major damages repaired before using it.